Space Heaters: Fire Safety First, Cost Second
A portable electric heater looks like the cheap, quick answer to a cold room. It can be, but it is also one of the few household appliances where a small mistake can start a fire. This guide puts safety first and cost second. It gives you a checklist to run through before you plug a heater in, a way to work out what it costs per hour with your own price, and a note on the situations where a heater is the wrong tool.
Safety first: the checklist
These points come from the National Fire Protection Association (NFPA) and the Office of the Illinois State Fire Marshal. Both give the same core rules.
- Keep it clear. NFPA says to keep the heater at least 3 feet (1 metre) away from anything that can burn, including people. The Illinois State Fire Marshal adds a 3-foot zone that children and pets stay out of. Think curtains, bedding, sofas, clothes and paper.
- Plug it into the wall. Both sources say to plug the heater directly into a wall outlet and never use an extension cord. Illinois also says not to use a surge protector.
- Never leave it running. NFPA says to turn the heater off and unplug it when you leave the room or go to bed. Illinois says the same.
- Buy it with the right features. NFPA says to choose a heater with an auto shut-off that switches it off if it tips over, a thermostat and overheat protection, and the seal of an independent testing laboratory.
- Put it on a solid, flat surface and out of the way of foot traffic. NFPA says never to block an exit.
- Check your alarms. Illinois advises checking that your smoke and carbon monoxide detectors work. If you use a fuel-burning heater, use the fuel the manufacturer specifies.
NFPA says nearly half of all space heater fires involve electric space heaters. The Illinois State Fire Marshal quotes NFPA figures for 2018 to 2022 showing that space heaters and heating stoves caused 46% of home heating equipment fires and 76% of the deaths from them. These are United States figures. They are a reason for care, not a forecast for your home.
What a heater costs to run
The method is the same as in the earlier post on appliance running costs: kilowatts times hours gives kWh, and kWh times your price gives cost. Utility sources say a typical portable heater uses about 1,500 watts, which is 1.5 kWh for every hour at full power. Check the label on yours.
Cost per hour: 1.5 kW × 1 hour = 1.5 kWh; × 10 = 15
Four hours a day: 1.5 × 4 = 6 kWh per day; × 30 days = 180 kWh a month
Cost for the month: 180 × 10 = 1,800
BC Hydro gives a similar real-world example: a 1,400-watt heater used for an average of four hours a day costs about $19 a month at their rates. Your result will depend on your price and your hours. A heater with a thermostat switches itself off when the room is warm, so it may draw its full watts for only part of the time. A plug-in watt meter shows what yours really uses.
Which type, and for what
BC Hydro describes three common types and where each fits. It also gives prices in Canadian dollars, which are left out here.
| Type | Best for | Drawbacks |
|---|---|---|
| Convection | Small spaces, such as under a desk in an enclosed office | No heat once it is switched off; fan noise; exposed elements |
| Radiant oil-filled | Warming a room you will be in for a while, such as a corner of the living room in the evening | Slow to heat up; heavy |
| Infrared | Focused heat for sitting still, such as working or watching TV | No heat once it is switched off; only works well in small spaces |
Using it for less
BC Hydro's tips are to heat only a small room or space, close doors and windows to keep the heat in, use the heater only for short periods when you need it, and switch it off when you leave the room. A utility in Wisconsin advises using a heater only in the room you are in, as extra heat and not as your only heating. Warm clothing and a blanket cost nothing to run, so try them first.
How to check the result
- Read the label for watts, and look for the testing-laboratory mark and the tip-over switch.
- Work out the cost per hour with your own price from your bill.
- Plan the hours. Decide how long it will run, and set a reminder to switch it off.
- Compare. If you have a watt meter, note the kWh over a week of use and compare it with your bill.
When this may not help
- A heater is the wrong tool if you need to heat a whole home, or a room for most of the day. A heater used for long hours can cost a lot.
- If your wiring is old or the sockets get warm, do not run a high-power heater until an electrician has checked them.
- The cost example uses an invented price. Your electricity plan may charge different rates at different times.
Sources
Checked on 19 October 2026. The cost example uses an invented price. Rules, sockets and electricity prices vary by country.
- National Fire Protection Association, Portable Space Heaters (safety tip sheet, copyright 2017, as hosted by the City of Mississauga): 3-foot clearance, plug into the wall, no extension cord, switch off and unplug when leaving or going to bed, auto shut-off, thermostat and overheat protection, independent laboratory seal, flat surface, nearly half of space heater fires involve electric heaters.
- Office of the Illinois State Fire Marshal, Space Heater Safety: 3-foot clearance and kid-free and pet-free zone, no extension cord or surge protector, never leave unattended, turn off at bedtime, tip-over shut-off, testing laboratory certification, working smoke and carbon monoxide detectors, NFPA figures for 2018 to 2022.
- BC Hydro, Portable space heaters: the 1,400-watt example, the three heater types and their best uses, and the tips for heating less.
- Marshfield Utilities, Electric Space Heaters: What you should know: a typical heater uses 1,500 watts; use it in the room you are in as extra heat rather than the only source.
How this article was prepared: it was drafted with AI assistance, and each factual claim was checked against the sources listed above. The author is Rohan Rawat.
Comments
Post a Comment