How to Read a Light Bulb Box: Lumens, Watts and Color

Buying a replacement bulb used to be simple: you picked the watts. With LED bulbs, the watts on the box tell you how much electricity the bulb uses, not how bright it is. Brightness comes from a different number, and the colour of the light comes from a third. This guide is a one-page decoder for the numbers on a bulb box, a way to pick the right replacement, and one practice calculation for what the swap can save.

In brief: Look for lumens, not watts: lumens measure brightness. Kelvin (K) tells you the colour of the light, from warm and yellow to cool and blue. Watts tell you how much electricity the bulb uses, and for the same brightness an LED uses far fewer.

The numbers on the box

NumberWhat it tells youHow to use it
Lumens (lm)Brightness. More lumens means a brighter bulb.Match the lumens of the bulb you are replacing, then go brighter or dimmer if you want.
Watts (W)How much electricity the bulb uses.Use it to compare running cost, not brightness.
Kelvin (K)Light appearance. Lower numbers are warmer and yellower, higher numbers are cooler and bluer.Choose by room and use (see the table below).
Life (hours or years)How long the maker expects the bulb to last.A longer life matters most for places that are hard to reach.
DimmableWhether the bulb works with a dimmer switch.If your fixture has a dimmer, use a bulb marked dimmable.

In the United States, the Federal Trade Commission has required a standard Lighting Facts label on bulb packaging since 2011, modelled on the Nutrition Facts label on food. It shows brightness in lumens, the estimated yearly energy cost, the life, the light appearance, the wattage and whether the bulb contains mercury. Boxes in other countries lay these out differently, and I could not confirm the current Indian labelling rules for this post, so check which of these numbers your box actually shows.

Match the brightness

The U.S. Department of Energy gives a rule of thumb for choosing an energy-saving bulb to replace an old incandescent one. Find the watts of the old bulb, then look for about this many lumens on the new box.

Old incandescent bulbLook for about
40 W450 lumens
60 W800 lumens
75 W1,100 lumens
100 W1,600 lumens

If you do not know what the old bulb was, hold the new box next to a bulb you like in another room and compare the lumens printed on both. A little more or a little less is fine, since your eye adjusts.

Choose the colour

ENERGY STAR's bulb guide lists colour temperatures in steps from 2200K up to 6500K, and says to choose by where you will use the light. It describes soft or warm white as ideal for most indoor uses, neutral or cool white as good for kitchens and work spaces, and daylight as good for reading. Use the table below as a starting point, then try one bulb before you buy a box for the whole house.

WhereStart withWhy
Living room, bedroom, hallwaySoft or warm white (lower K)ENERGY STAR calls this ideal for most indoor uses.
Kitchen, study desk, work areaNeutral or cool white (mid K)ENERGY STAR says it suits kitchens and work spaces.
A reading lampDaylight (higher K)ENERGY STAR says daylight is good for reading. Some people find it harsh, so test one first.

Practice numbers: what the swap can save

The DOE's consumer lighting guide gives an example of a 75-watt incandescent bulb being replaced by an LED of about the same brightness, 1,100 lumens, that uses about 9 watts. The hours and the price below are invented for practice. Use your own hours and your own price per kWh from your bill.

Example (made-up hours and price)

Old bulb: 75 W × 4 hours = 300 Wh = 0.3 kWh per day; × 365 = 109.5 kWh per year

LED: 9 W × 4 hours = 36 Wh = 0.036 kWh per day; × 365 = 13.14 kWh per year

Difference: 109.5 − 13.14 = 96.36 kWh per year

At a price of 10 per kWh: about 964 per year for this one bulb

The result scales with the hours the light is on. A bulb that is on for four hours a day saves far more than one in a cupboard that is lit for ten minutes, so swap the most-used lights first. The DOE guide also says LEDs last up to 25 times longer than incandescent bulbs and use up to 90% less energy, and last up to four times longer than CFLs. These are best-case figures, not a promise for any one bulb.

Check the fixture: Many light fixtures have a label with a maximum wattage. Never go above it. Make sure the bulb has the right base and shape for the fixture, and use a bulb marked dimmable if the light is on a dimmer. If you are not sure what a fixture can take, ask a qualified electrician.

How to check the result

  1. Before you buy, write down the old bulb's watts and the room it is in.
  2. At the shop, find the lumens on the box and compare with the table above.
  3. Buy one bulb first. Check that the colour and brightness suit the room in the evening, when it matters.
  4. Then replace the rest, starting with the lights that are on the most.

When this may not help

  • Dimmer switches that were made for old bulbs may flicker or buzz with some LEDs. Use a bulb marked dimmable, and ask the seller if the dimmer is old.
  • Lumens are not a guarantee of how a room will look. Wall colour, shades and the position of the light all change how bright it feels.
  • If a bulb or fixture gets unusually hot, smells or flickers, switch it off and have it checked.

Sources

Checked on 19 October 2026. The practice hours and price are invented. Labelling rules vary by country, and I could not confirm the current Indian rules, so read your own box.

  • U.S. Department of Energy, Lumens and Lighting Facts (Energy Saver): lumens measure brightness; the 450, 800, 1,100 and 1,600 lumen rule of thumb; the Lighting Facts label contents.
  • U.S. Department of Energy, Consumer Guide to Energy-Efficient Lighting: the 75 W incandescent and 9 W LED example at 1,100 lumens; the FTC label since 2011; Kelvin, warmer and cooler light; lifetimes compared with incandescent and CFL bulbs; dimmer-compatible LEDs.
  • ENERGY STAR, LED Bulbs Made Easy (Light Bulb Purchasing Guide): look for lumens, not watts; colour temperature steps from 2200K to 6500K; warm white for most indoor uses, neutral or cool white for kitchens and work spaces, daylight for reading.

How this article was prepared: it was drafted with AI assistance, and each factual claim was checked against the sources listed above. The author is Rohan Rawat.

Comments

Popular posts from this blog

12 No-Cost Ways to Lower Your Electricity Use at Home

How to Find Out What Your Appliances Cost to Run