Laundry and Dishwasher Settings: Where the Electricity Goes

The settings on a washing machine or dishwasher are easy to ignore. The programme you pick, the temperature and the way you dry the load all change how much electricity the machine uses, and most of the difference comes from one thing: heating water. This guide maps the settings that matter, shows how to check them against your own manual, and works through one practice calculation so you can put a number on your own habits.

In brief: For both machines, heating the water is one of the biggest uses of energy. Cooler water, full loads and air drying are the three settings most worth checking. The U.S. Department of Energy says switching a wash from hot to warm can cut a load's energy use in half.

Where the electricity goes

The Australian government's energy rating site says heating water is one of the biggest users of energy for a washing machine, and says the same of a dishwasher. If your machine has a heating element, or you feed it hot water, that is where a lot of the energy goes. The motor, pumps and controls use some too, but the heat is the setting you can most easily change.

The size of the load matters as well. The same site notes that a partial load can use about the same water and electricity as a full one, so a half-empty machine costs you almost as much per wash as a full one.

A settings map

MachineSettingWhat to doWhat it can and cannot change
Washing machineWater temperatureUse cold or warm where the care label and the stains allow it.DOE says hot to warm can cut a load's energy use in half. Oily stains may need warmer water.
Washing machineLoad sizeWash full loads. For a small load, pick the matching water-level setting if your machine has one.A partial load can use about the same electricity as a full one on a machine without load sensing.
Washing machineDetergentIf you have a front-loader or a high-efficiency top-loader, use detergent made for it.Affects cleaning and suds, not just energy. Follow the detergent maker's directions.
Clothes dryerDrying timeDo not over-dry. A moisture sensor, if your dryer has one, stops it when clothes are dry.Air drying uses no dryer electricity at all, but depends on weather and space.
DishwasherTemperatureChoose the lower or medium setting if your manual offers one. The Australian site suggests around 50°C.Very greasy or baked-on dishes may need a hotter or longer programme.
DishwasherPre-rinseScrape off loose food instead of rinsing. If you rinse, a light rinse is enough.Saves water and your time. DOE gives no energy figure for it.
DishwasherDryingPick air-dry rather than heat-dry, or open the door after the wash.Dishes take longer to dry and may stay damp.
DishwasherProgrammePick the eco setting where there is one. If not, match the programme to the load.What eco actually does differs by model, so read your manual.
BothDelayed startIf your electricity plan has cheaper hours, schedule the machine for them.This changes the cost per unit, not the units used. It only helps if your plan has cheaper hours.

Practice numbers: what a heated wash can cost

This uses the same formula as the post on appliance running costs: watts × hours ÷ 1,000 gives kWh, and kWh × price gives cost. Every number below is invented for practice. Your manual and your bill give the real ones.

Example (made-up numbers)

Heated wash: 1.5 kWh per load. Cold wash: 0.3 kWh per load.

Difference: 1.5 − 0.3 = 1.2 kWh per load

200 loads a year: 1.2 × 200 = 240 kWh

At a price of 10 per kWh: 240 × 10 = 2,400 a year

The point is the method, not the total. If your machine has no heating element and you never feed it hot water, your own difference may be close to zero. If you do use heated cycles often, a number like this tells you whether the setting is worth changing.

Check your own machine

  1. Find the manual. Look for the model number on the label inside the door or on the back, then search for it on the maker's website for a free copy.
  2. Find the programme table. Most manuals list each programme, its temperature and how long it runs. Some give kWh or litres per cycle. Write down the ones you actually use.
  3. Compare two programmes. If the manual gives kWh for each, use the formula above. If it does not, a plug-in watt meter on the socket will show the kWh for a full cycle.
  4. Change one setting at a time. Move one load to cold or warm, or one dishwasher run to air-dry, and see whether the result is still clean and dry. If it is, keep it.

When this may not help

  • Laundry that needs a hot wash for hygiene, or that has oily stains, may need warmer water. Follow the care label and the detergent maker's directions.
  • A machine with no heater that takes cold water only has little to save by lowering the temperature.
  • Percentages from the U.S. programmes, such as those for ENERGY STAR machines, describe their product mix and test conditions, not your machine. Use them as a guide to what to look for when you buy, not as a promise of savings.

Sources

Checked on 19 October 2026. The practice numbers above are invented. Machine designs and labelling vary by country.

  • U.S. Department of Energy, clothes washing and drying energy savings page (Energy Saver): less and cooler water; hot to warm can cut a load's energy use in half; oily stains; cold-water detergents; full loads; ENERGY STAR washers use nearly 35% less water and about 25% less energy than standard washers; do not over-dry; moisture sensors.
  • U.S. Department of Energy, dishwasher energy saving page (Energy Saver): run full loads; scrape instead of rinsing; air-dry; eco setting; ENERGY STAR dishwashers use about 12% less energy and 30% less water than standard models on average.
  • Australian Government energy rating site, Tips for using your clothes washer efficiently and tips for using your dishwasher efficiently: heating water is one of the biggest users of energy; a partial load can use about as much as a full load; around 50°C for dishwashers; air-dry; delayed start for off-peak hours.

How this article was prepared: it was drafted with AI assistance, and each factual claim was checked against the sources listed above. The author is Rohan Rawat.

Comments

Popular posts from this blog

12 No-Cost Ways to Lower Your Electricity Use at Home

How to Find Out What Your Appliances Cost to Run

How to Read a Light Bulb Box: Lumens, Watts and Color